Gigalink RR-GV41P 5 Port PoE+ Switch, 4 PoE + 1 Uplink, 65W

Gigalink RR-GV41P 5 Port PoE Switch

Check the Gigalink RR-GV41P PoE switch price in BD on this page. The RR-GV41P is a small, affordable PoE+ switch made for four-camera IP CCTV kits and small networks, powering each device through its network cable so you avoid running separate power adapters to every camera.

Four PoE+ ports and one uplink

• Four 10/100Mbps PoE+ ports for cameras, access points or IP phones
• One uplink port to your NVR or router
• IEEE 802.3af and 802.3at support, up to 30W per port

Built-in 65W power supply

The power supply is inside the switch, so one mains cable powers everything. A 65W total is enough for four typical IP cameras with room to spare, or a mix of cameras and a Wi-Fi access point.

Why PoE for CCTV

With PoE, each camera needs only one Cat5e or Cat6 cable for both video and power. Installation is cleaner and cheaper, cameras can be placed where there is no power socket, and all cameras can be backed up from a single UPS at the switch.

Simple and reliable

Store-and-forward switching checks every packet for errors, keeping video streams stable. As an unmanaged switch, it needs no setup: connect and go.

Typical uses

Home and shop camera systems with up to four IP cameras, small offices with a ceiling access point and a couple of IP phones, and gatehouses or guard posts.

Need more ports?

For six ports with two uplinks, see the Gigalink RR-GV42M. For eight cameras, the Cudy FS1010P or FS1010PG are good options.

Buy from QASWATEC

QASWATEC sells genuine Gigalink networking products with an invoice and a 1-year warranty. Visit our Elephant Road, Dhaka showroom or order online for delivery across Bangladesh.