Cooler Master CryoFuze 7 MGZ-NDSG-N04G-R1 4g High Performance Thermal Paste

Cooler Master CryoFuze 7 MGZ-NDSG-N04G-R1 4g Thermal Paste

The Cooler Master CryoFuze 7 (MGZ-NDSG-N04G-R1) is a 4 gram thermal paste for CPUs, GPUs and other chips that need a thin layer between the chip and the cooler. Buyers looking for a cooler master cryofuze 7 get a nano particle paste that is electrically insulated, noncorrosive and stable across a very wide temperature range.

Key Features

• 4 gram pack with a scraper for spreading the paste
• Operating temperature range from -50 to 250 degrees Celsius
• Electrically insulated, so small spills near contacts are less of a risk than with conductive pastes
• Noncorrosive and oxidation-resistant formula
• Specific gravity of 2.7 at 25 degrees Celsius
• Nanoparticle formula aimed at good heat transfer
• Viscosity described as balanced, so the paste spreads without running

Why Replace Thermal Paste

Thermal paste fills the tiny gaps between a processor and its cooler. Old paste dries out over time, which can raise temperatures and fan noise. Replacing it when you clean your cooler or install a new one helps the heat move to the cooler more evenly.

How to Apply

Clean the old paste from the chip and cooler plate with isopropyl alcohol. Place a small amount in the centre of the processor and mount the cooler with even pressure; spreading is not usually required for a cooler with a flat contact plate, and the supplied scraper can be used where a thin even layer is preferred. Do not over-apply, because too much paste can reduce contact.

Buying Notes

Cooler Master does not list a thermal conductivity value on the product page, so compare real-world temperatures rather than a spec number. The thermal impedance is listed as 0.03 in the specifications and the units are inconsistent on the page. The product page does not state a warranty.

Buy CryoFuze 7 from QASWATEC

Available at QASWATEC, Elephant Road, Dhaka, with delivery across Bangladesh.